Difference between revisions of "Project Ideas"

Revision as of 06:57, 17 August 2011

microchip product finder: http://www.microchip.com/productselector/MCUProductSelector.html

http://ww1.microchip.com/downloads/en/AppNotes/01076A.pdf http://usbdmx.com/schematic.html

Ethernet

There are several different ways to do ethernet. The possibly cheapest involves an pic18f that includes an ethernet PHY. It could be a good idea, or terrible.

• PIC that can run microchip pic stack
• * PIC18F26K80 Board with ENC26J60
• PIC that runs open source stack such as
• * HMMM
• AVR + Wiznet
• * Guteduino
• PIC32 with ethernet PHY
• * PIC32 Ethernet Board
• AVR32 with ethernet PHY
• * AVR 32 Ethernet Board

DMX

The minimum to make a DMX board, is a board that has a UART that can run at 250Kbps. Microchip has some Application notes that specify a method to recieve and transmit DMX data. See PIC DMX Development

Existing Projects

• AC Dimmer Board - supports a 485 UART, and dimming 6 AC loads. Currently the first revision of the board has a few issues. A new revision is in the works.

Ethernet Board from dangerous prototypes: http://dangerousprototypes.com/docs/Web_Platform

DMX: requires

RFID Board + Ethernet/485 RFID Board + Serial 16 Channel LED + Ethernet 16 Channel LED + DMX

16-512 LED + DMX DMX to TLC5940 Serial Ethernet to TLC9540 Serial

DMX to Serial Board

Relay Board + Ethernet

Relay Board (no complicated shit) Relay Board + Serial Buffered GPIO Board +Ethernet (Needs to be able to drive relays) Buffered GPIO Board + Serial

Bemix Board

MIDI/USB/DMX/Ethernet/Analog Audio Board ? Just routing board? Control surface?

http://www.opendmx.net/index.php/OpenDMX.net http://www.goddarddesign.com./ http://www.lifact.com/

3 Channel Stepper Driver

Actually making boards: http://www.instructables.com/id/Stop-using-Ferric-Chloride-etchant!--A-better-etc/step5/Save-the-etchant-for-next-round-Youre-done/

HCl and H202 Rework Station IR Leds, PS3 Eye, mirror?